Compare Models

Home › Showroom › Compare Models

2024 Grasshopper 225V-G4 52 in. Kohler 747 cc in Brunswick, Georgia — 2024 Grasshopper 225V-G4 52 in. Kohler 747 cc

View Details

Specs
Features

General Information

Manufacturer

Grasshopper

Model Year

2024

Model

225V-G4 52 in. Kohler 747 cc

Model Code

534088

Color

Brown

Body

Seat

Iso-mounted Premium Comfort Seat. Features include a high-back, deep-cushioned, foam-padded Cordura®-covered, padded foldable arm rests, padded backrest with lumbar support, coil-spring suspension and embroidered Grasshopper logo on seat back. Adjustable fore and aft.

Safety Features

Interlock system - Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.

Drivetrain

Transmission/Drive

Heavy-duty Hydro-Gear ZT4400 hydrostatic transmissions with cooling fans, integrated transaxles with 12 cc piston pumps and 16 cc piston motors, gear reduction, internal disc brakes, and 1-3/8 in. axles

Filtration / Hydro fluid - Self-contained fluid and internal filtration. CoolTemp HydroMax fluid withstands high and low temperature extremes for extended service intervals after 100 hr. break-in oil change.

Travel Speed Forward

0 - 9.0 mph (0 - 14.5 km/h)

Travel Speed Reverse

0 - 6.0 mph (0 - 9.7 km/h)

Drive Tires

23 x 10.50 x 12 turf, 4-ply rated

Steering Tires

13 x 6.50 x 6; pneumatic with greasable, double-sealed bearings to protect from grass wrap

Brakes

Dynamic braking through hydrostatic transmission

Parking Brake

Internal disc brake in transmission

Electrical

Battery

Maintenance-free - 12V

Instrumentation

Console-mounted - Digital hour meter, parking brake indicator light, ignition switch, choke and push / pull PTO switch

Hour Meter

Standard

Engine

Engine Make

Kohler

Engine Model

Confidant

Engine Type

V-Twin

Cooling

Air

Displacement

747 cc (45.6 ci)

Ignition

Breakerless

Air Cleaner

Heavy-duty cyclonic air filter with QUAD-CLEAN™ multi-stage air filtration

Starter

Solenoid shift

Lubrication

Pressure lube / filter

Fuel Type

Gasoline - unleaded

Fuel Capacity

6.5 gal. (26.6 l)

Measurements

Length

Midmount with Duramax® deck, mowing position - 76 in. (193 cm)

Width

Deck (Side discharge) - 65.5 in. (166.5 cm)

Deck (Mulch) - 53.5 in. (135.9 cm)

Deck (Side discharge) - 65.5 in. (166.5 cm)

Deck (Mulch) - 53.5 in. (135.9 cm)

Height

Seat back - 46 in. (116.9 cm)

Seat cushion - 30 in. (76.2 cm)

ROPS - 68 in. (172.7 cm)

Seat back - 46 in. (116.9 cm)

Seat cushion - 30 in. (76.2 cm)

ROPS - 68 in. (172.7 cm)

Weight

Uncrated - 980 lb. (444.5 kg)

Cutting Width

52 in.

Turning Radius

True zero degree, turns within own length with counter-rotating, independently powered drive wheels

Mowing Height Range

1.0 - 4.5 in. (2.5 - 11.4 cm)

Operational

Steering

One- or two-hand operation with adjustable HydraSmooth™ QuikAjust Tilt™ dual levers with 9 in. adjustment for a custom fit that automatically return to neutral from either forward or reverse position

Deck Construction

Robotic-welded steel - Double-layered 10 ga. plus 7 ga. formed-steel laminated spindle plane 0.313 in. (7.95 mm) thick - more than 25% thicker than 0.25 in. (6.35 mm) with 7 ga. skirts for geometric strength. Spindle plane is 0.9 in. (22.86 mm) thick in stress zones. Anvi

Discharge

Side

Spindles

Assemblies - Sentry™ Spindle System, approx. 1 in. (2.5 cm) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.

Housings - 8 in. (20.3 cm) diameter machined aluminum with 6-bolt pattern

Blades

Tempered, alloy steel - (3) 18 in. (45.7 cm)

Drive - Belt drive with single Kevlar V-belt and idler arm tensioning

Tempered, alloy steel - (3) 18 in. (45.7 cm)

Drive - Belt drive with single Kevlar V-belt and idler arm tensioning

Other

Includes

Crankshaft - Vertical

Muffler - Ultra quiet, single, industrial type

Suspension - Roomy, iso-mounted footrest with Shock Impact Reduction System™ (SIRS™)

Crankshaft - Vertical

Muffler - Ultra quiet, single, industrial type

Suspension - Roomy, iso-mounted footrest with Shock Impact Reduction System™ (SIRS™)

Warranty

Commercial use - 2 year or 800 hr. (whichever comes first); limited covering parts and labor

Residential use - 4 year or 800 hr. (whichever comes first); limited: First two years covering parts and labor, last two years covering parts only

Commercial use - 2 year or 800 hr. (whichever comes first); limited covering parts and labor

Residential use - 4 year or 800 hr. (whichever comes first); limited: First two years covering parts and labor, last two years covering parts only

Features & Benefits

KOHLER CONFIDANT ENGINE: Professional-grade 747 cc Kohler Confidant OHV V-Twin engine. Designed to maximize airflow and reduce operating temperatures for extended service life. Heavy-duty cyclonic air filter with Quad-Clean™ multi-stage air filtration. Full-pressure lubrication to protect critical components.
QUIKAJUST TILT™ LEVERS: QuikAjust Tilt™ steering levers with "no tools" adjustment provide a 9-inch range for maximum comfort and fit while maintaining natural arm and wrist positions.
HYDRO-GEAR ZT-4400 TRANSMISSION: The G4 Hydro-Gear ZT-4400 transmissions are designed to provide powerful, smooth response The heavy-duty, self-contained commercial transaxles are integrated with a cooling fan and feature 1-3/8-inch axles for longer service life. You’ll also enjoy best-in-class transmission fluid change intervals after a 100-hour break-in period, reducing costs and maintenance time.
HEAVY-DUTY DECK: Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge. Specially designed cutting chambers enhance airflow for better cut quality. Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection. Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength. Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut. Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion.
QUIKAJUST® DROP PIN HEIGHT ADJUSTMENT: Raise and lower the deck easily with foot pedal and drop pin for precision cutting heights between 1.0 and 5.0 inches.
VIGILANT OPERATOR PRESENCE SYSTEM™: Standard, low profile Roll-over Protection System (ROPS) structure with an adjustable seatbelt. Dampened steering levers that return to neutral from forward and reverse. Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position.
ULTIMATE OPERATOR STATION™: The deep-cushioned, deluxe Premium Comfort Seat features a coil-spring suspension and padded lumbar support with sliding 2-inch fore and aft adjustment for all-day comfort. Iso-mounting eliminates vibration before it reaches the seat, and both padded seat and foldable armrests are covered in scuff-resistant, breathable CoolTemp Cordura® fabric, which dissipates heat and won’t tear or crack with extended use. Operational controls including throttle, ignition and push/pull PTO switches, choke, angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach. One- or two-handed operation with ComfortReach™ adjustable Hydra-Smooth™ dual levers that automatically return to neutral from either forward or reverse position.
REDUCED MAINTENANCE: Only two Access-Eze™ lubrication points cut maintenance time up to 95%. Self-tensioning belts minimize cost and labor on routine maintenance.
RUGGED CONSTRUCTION: Robotically-welded steel construction for long-lasting durability. Centered-bearing design provides greater load-bearing capacity to handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts. Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance.

Features & Benefits

KOHLER CONFIDANT ENGINE: Professional-grade 747 cc Kohler Confidant OHV V-Twin engine. Designed to maximize airflow and reduce operating temperatures for extended service life. Heavy-duty cyclonic air filter with Quad-Clean™ multi-stage air filtration. Full-pressure lubrication to protect critical components.
QUIKAJUST TILT™ LEVERS: QuikAjust Tilt™ steering levers with "no tools" adjustment provide a 9-inch range for maximum comfort and fit while maintaining natural arm and wrist positions.
HYDRO-GEAR ZT-4400 TRANSMISSION: The G4 Hydro-Gear ZT-4400 transmissions are designed to provide powerful, smooth response The heavy-duty, self-contained commercial transaxles are integrated with a cooling fan and feature 1-3/8-inch axles for longer service life. You’ll also enjoy best-in-class transmission fluid change intervals after a 100-hour break-in period, reducing costs and maintenance time.
HEAVY-DUTY DECK: Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge. Specially designed cutting chambers enhance airflow for better cut quality. Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection. Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength. Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut. Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion.
QUIKAJUST® DROP PIN HEIGHT ADJUSTMENT: Raise and lower the deck easily with foot pedal and drop pin for precision cutting heights between 1.0 and 5.0 inches.
VIGILANT OPERATOR PRESENCE SYSTEM™: Standard, low profile Roll-over Protection System (ROPS) structure with an adjustable seatbelt. Dampened steering levers that return to neutral from forward and reverse. Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position.
ULTIMATE OPERATOR STATION™: The deep-cushioned, deluxe Premium Comfort Seat features a coil-spring suspension and padded lumbar support with sliding 2-inch fore and aft adjustment for all-day comfort. Iso-mounting eliminates vibration before it reaches the seat, and both padded seat and foldable armrests are covered in scuff-resistant, breathable CoolTemp Cordura® fabric, which dissipates heat and won’t tear or crack with extended use. Operational controls including throttle, ignition and push/pull PTO switches, choke, angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach. One- or two-handed operation with ComfortReach™ adjustable Hydra-Smooth™ dual levers that automatically return to neutral from either forward or reverse position.
REDUCED MAINTENANCE: Only two Access-Eze™ lubrication points cut maintenance time up to 95%. Self-tensioning belts minimize cost and labor on routine maintenance.
RUGGED CONSTRUCTION: Robotically-welded steel construction for long-lasting durability. Centered-bearing design provides greater load-bearing capacity to handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts. Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance.