Compare Models

Home › Showroom › Compare Models

2023 Grasshopper 400D 61 in. Kubota Diesel 1,261 cc in Brunswick, Georgia — 2023 Grasshopper 400D 61 in. Kubota Diesel 1,261 cc

View Details

Specs
Features

General Information

Manufacturer

Grasshopper

Model Year

2023

Model

400D 61 in. Kubota Diesel 1,261 cc

Model Code

534187

Color

Brown

Body

Seat

Iso-mounted Premium Comfort Seat. Features include a high-back, deep-cushioned, foam-padded Cordura®-covered, padded arm rests, padded backrest with lumbar support, coil-spring suspension and embroidered Grasshopper logo on seat back

Safety Features

Interlock system - Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral

Drivetrain

Transmission/Drive

Design-matched G2 hydrostatic system with auxiliary cooling fans, HydroGear variable displacement 21 cc piston-type pumps and high-torque Parker wheel motors

Filtration / Hydro Fluid - 7 micron absolute, spin-on / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000-hour change intervals

Design-matched G2 hydrostatic system with auxiliary cooling fans, HydroGear variable displacement 21 cc piston-type pumps and high-torque Parker wheel motors

Filtration / Hydro Fluid - 7 micron absolute, spin-on / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000-hour change intervals

Travel Speed Forward

0 - 11 mph (0 - 17.7 kph)

Travel Speed Reverse

0 - 6.0 mph (0 - 9.7 kph)

Drive Tires

26 x 12 x 12 turf, 6-ply rated

Steering Tires

13 x 6.50 x 6; rib tread, pneumatic with greasable, double-sealed bearings to protect from grass wrap

Brakes

Dynamic braking through hydrostatic transmission

Parking Brake

Disc, one for each drive wheel

Electrical

Battery

Maintenance-free - 12 V

Instrumentation

Console-mounted - Low engine oil pressure, alternator, temperature and parking brake warning lights, engine temperature and volt gauges, combination electronic fuel gauge / hour meter, two USB charging ports, ignition, work lights, glow plug and push / pull PTO switches

Lighting

LED - Standard

Hour Meter

Standard

Engine

Engine Make

Kubota

Engine Model

MaxTorque™

Cooling

Liquid

Cylinders

Displacement

1,261 cc (77 cu. in.)

Ignition

Breakerless, diesel quick heat glow plug

Air Cleaner

Heavy-duty, remote mounted, cyclonic, dual element air filtration

Starter

Solenoid shift

Lubrication

Pressure lube / filter

Fuel Type

Diesel - No. 2

Fuel Capacity

12 U.S. gal. (45.4 l)

Measurements

Length

Midmount with Duramax® deck, mowing position - 86 in. (218.4 cm)

Width

Deck Side discharge - 74.5 in. (189.2 cm)

Deck Mulch - 62.5 in. (158.8 cm)

Deck Side discharge - 74.5 in. (189.2 cm)

Deck Mulch - 62.5 in. (158.8 cm)

Height

Seat back - 47 in. (119.4 cm)

Seat cushion - 31.5 in. (80.0 cm)

ROPS - 69.5 in. (176.5 cm)

Seat back - 47 in. (119.4 cm)

Seat cushion - 31.5 in. (80.0 cm)

ROPS - 69.5 in. (176.5 cm)

Weight

Uncrated - 1,450 lb. (657.7 kg)

Cutting Width

61 in.

Turning Radius

True zero degree, turns within own length with counter-rotating, independently powered drive wheels

Mowing Height Range

1.0 - 5.0 in. (2.5 - 12.7 cm)

Operational

Steering

One- or two-hand operation with adjustable HydraSmooth™ dual levers that automatically return to neutral from either forward or reverse position

Deck Construction

Robotic-welded steel - Double-layered 10-ga. plus 7-ga. formed-steel laminated spindle plane 0.313 in. (7.95 mm) thick- more than 25% thicker than 0.25 in. (6.35 mm) with 7-ga. skirts for geometric strength. Spindle plane is 0.9 in. (22.86 mm) thick in stress zones. Anvil-edge design with 0.5 in. (12.7 mm) reinforcement on front edge of deck

Deck Type

DuraMax

Discharge

Side

Spindles

Assemblies - Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.

Housings - 8 in. (20.3 cm) diameter machined aluminum with 6-bolt pattern

Blades

Tempered, alloy steel - (3) 21 in. (53.3 cm)

Drive - Belt drive with single Kevlar V-belt and idler arm tensioning

Tempered, alloy steel - (3) 21 in. (53.3 cm)

Drive - Belt drive with single Kevlar V-belt and idler arm tensioning

Other

Includes

Crankshaft - Horizontal

Muffler - Ultra quiet, single, industrial type

Suspension - InFrame™ suspension with iso-mounted seat and footrest

Crankshaft - Horizontal

Muffler - Ultra quiet, single, industrial type

Suspension - InFrame™ suspension with iso-mounted seat and footrest

Warranty

Commercial use - 3-year unlimited hours; limited: First two years covering parts and labor; third year covering parts only

Residential use - 4-year or 800-hour (whichever comes first); limited covering parts and labor

Commercial use - 3-year unlimited hours; limited: First two years covering parts and labor; third year covering parts only

Residential use - 4-year or 800-hour (whichever comes first); limited covering parts and labor

Features & Benefits

KUBOTA DIESEL ENGINE: EPA Tier 4 Final-compliant 77 cu. in. (1.3L) , 3-cylinder, liquid-cooled Kubota Clean Diesel engine with horizontal crankshaft and pressure lube for smooth, reliable operation
ULTIMATE OPERATOR STATION™: The deep-cushioned, deluxe Premium Comfort Seat features a coil-spring suspension and padded lumbar support for all-day comfort. Iso-mounting eliminates vibration before it reaches the seat, and both padded seat and armrests are covered in scuff-resistant, breathable CoolTemp Cordura® fabric, which dissipates heat and won’t tear or crack with extended use. Operational controls including throttle, choke and angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach. One or two hand steering system with QuikAjust Tilt™ dual levers with 9-inch comfort range that automatically returns the levers to the neutral position from the forward or reverse position.
HEAVY DUTY DECK: Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge. Specially designed cutting chambers enhance airflow for better cut quality. Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection. Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength. Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut. Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion.
HYDRAULIC HEIGHT ADJUSTMENT: Hydraulic Height Adjustment for MidMount DuraMax™ decks 61-inches and larger allows operators to raise and lower cutting height at infinitely variable settings with toggle switch control. Standard on 400 Series models.
MINIMAL MAINTENANCE: Fewer than 10 grease points and easy top-side access to belts and filters. 1,000-hour transmission fluid change intervals. Self-tensioning belts minimize cost and labor on routine maintenance.
REDUCED MAINTENANCE: Only two Access-Eze™ lubrication points cut maintenance time up to 95%. Self-tensioning belts minimize cost and labor on routine maintenance.
VIGILANT OPERATOR PRESENCE SYSTEM™: Standard, low profile Roll-over Protection System (ROPS) structure with an adjustable seatbelt. Dampened steering levers that return to neutral from forward and reverse. Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position.
DESIGN-MATCHED G2 TRANSMISSION: Rugged G2 transmission with auxiliary cooling fans, HydroGear variable displacement 21 cc piston-type pumps and high-torque Parker wheel motors. CoolFan™ hydro cooling system with 7-micron absolute filter for cooling efficiency. Delivers smooth response and requires less maintenance, with industry-leading 1,000-hour fluid change interval.
RUGGED CONSTRUCTION: Robotically-welded steel construction for long-lasting durability. Centered-bearing design provides greater load-bearing capacity to handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts. Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance.
HIGH TEMPERATURE CLUTCH CUT OUT: Equipped with a High Temperature Clutch Cut-Out that automatically disengages the PTO if engine temperature reaches a certain point to prevent engine damage

Features & Benefits

KUBOTA DIESEL ENGINE: EPA Tier 4 Final-compliant 77 cu. in. (1.3L) , 3-cylinder, liquid-cooled Kubota Clean Diesel engine with horizontal crankshaft and pressure lube for smooth, reliable operation
ULTIMATE OPERATOR STATION™: The deep-cushioned, deluxe Premium Comfort Seat features a coil-spring suspension and padded lumbar support for all-day comfort. Iso-mounting eliminates vibration before it reaches the seat, and both padded seat and armrests are covered in scuff-resistant, breathable CoolTemp Cordura® fabric, which dissipates heat and won’t tear or crack with extended use. Operational controls including throttle, choke and angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach. One or two hand steering system with QuikAjust Tilt™ dual levers with 9-inch comfort range that automatically returns the levers to the neutral position from the forward or reverse position.
HEAVY DUTY DECK: Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge. Specially designed cutting chambers enhance airflow for better cut quality. Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection. Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength. Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut. Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion.
HYDRAULIC HEIGHT ADJUSTMENT: Hydraulic Height Adjustment for MidMount DuraMax™ decks 61-inches and larger allows operators to raise and lower cutting height at infinitely variable settings with toggle switch control. Standard on 400 Series models.
MINIMAL MAINTENANCE: Fewer than 10 grease points and easy top-side access to belts and filters. 1,000-hour transmission fluid change intervals. Self-tensioning belts minimize cost and labor on routine maintenance.
REDUCED MAINTENANCE: Only two Access-Eze™ lubrication points cut maintenance time up to 95%. Self-tensioning belts minimize cost and labor on routine maintenance.
VIGILANT OPERATOR PRESENCE SYSTEM™: Standard, low profile Roll-over Protection System (ROPS) structure with an adjustable seatbelt. Dampened steering levers that return to neutral from forward and reverse. Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position.
DESIGN-MATCHED G2 TRANSMISSION: Rugged G2 transmission with auxiliary cooling fans, HydroGear variable displacement 21 cc piston-type pumps and high-torque Parker wheel motors. CoolFan™ hydro cooling system with 7-micron absolute filter for cooling efficiency. Delivers smooth response and requires less maintenance, with industry-leading 1,000-hour fluid change interval.
RUGGED CONSTRUCTION: Robotically-welded steel construction for long-lasting durability. Centered-bearing design provides greater load-bearing capacity to handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts. Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance.
HIGH TEMPERATURE CLUTCH CUT OUT: Equipped with a High Temperature Clutch Cut-Out that automatically disengages the PTO if engine temperature reaches a certain point to prevent engine damage